Article successfully added.

Electric kit for 7-piece candle arch with spout and disk by SEIFFEN.COM

€22.00 *

Prices incl. VAT, excise duties, customs, excl. shipping

content:
1 Zugentlastung, 1 Anschlußleitung mit Schalter, 1 Lüsterklemme, 6 Quetschverbinder, 7 Holzscheiben, 7 Kerzenhülsen komplett montiert mit ca. 12 cm langen Leitungen, 7 Riffelkerzen 34 Volt
dimensions:
Kerzenhülse 6cm x 1,5 cm
manufacturer:
Zubehör
article-no.:
NEL965-7
EAN:
4260651079800

Delivery time: 1 - 3 workdays at your place in Germany

or order now with
Original
Erzgebirge
Extra secure
Packaging
Best
Advice
Beschreibung

Assembly kit for 7 candle arch, 7 corrugated candles 34 Volt, 1 connecting cable with switch, 1 luster terminal, 1 strain relief, 7 candle sleeves completely assembled with approx.. 12 cm long cables, 6 crimp connectors, 7 wooden discs

Instructions for the component set of a candle arch in series connection

- 7 candles is with 34 V
The main part of the component set are the candle holders, which consist of socket, sleeve, grommet (made of wood), 2-fold insulated wires with approx. 26 cm long contacts and the candle.

This candle holder is then attached to the designated points of the existing arch. The two insulated wires (outer-diameter strand 2.5 mm) are cut in the middle and then cut to the appropriate length. The ends must then be stripped and connected to the wires of the other candle holders in series. This is done either using a parallel connector (included in the component set) or by soldering.
The last two free wires are connected using a luster terminal, which is hidden in the base of the candle arch. One of the two wires must be connected to the enclosed supply cable of approx. 60cm from one side of the candle arch to the chandelier terminal. The connecting cable with switch is also connected to the chandelier terminal. The candles are screwed in and the candle arch is already electrically installed.

Please note, that when soldering the wires, the soldering point must be stripped with heat-shrink tubing (not included in the component set).
In addition, when using LED candles, please note, that only LED candles must be used, as LED candles are not compatible with other candles.

Safety note:
Electrical installations should only be carried out by people with the necessary electrical engineering expertise.   SEIFFEN.COM by Nestler therefore accepts no liability for the installation and use of the component set.

Produktdetails

product details

manufacturer:
product type:
electrical kit for candle arch
series:
kits for candle arches
place of origin:
Kurort Seiffen | Erzgebirge
country of manufacture:
Deutschland - Made in Germany
location:
indoor
power:
7 Riffelkerzen je 3 W
number of lights:
7
USP:
hobby supplies, Original SEIFFEN.COM by Nestler!
dimensions:
Kerzenhülse 6cm x 1,5 cm
content:
1 Zugentlastung, 1 Anschlußleitung mit Schalter, 1 Lüsterklemme, 6 Quetschverbinder, 7 Holzscheiben, 7 Kerzenhülsen komplett montiert mit ca. 12 cm langen Leitungen, 7 Riffelkerzen 34 Volt
Wide:
13,00 cm
Height:
20,00 cm
Length:
4,00 cm
Bewertung

Reviews

Fragen zum Produkt

Do you have questions about the product?

  • We ship
    from Seiffen all over the world

  • MADE IN GERMANY
    Only originals from the Erzgebirge

  • Know-how from 20 years
    Online shop and own production